as we all know, the instructions suck, so here are two helpful tips for routing the vac line from the throtle body (dont cap it!) and a good spot to mount your vsv switch now that it doesnt have a home! (must be plugged in to harness)
in this pic you can see the best way [...]
This is featured post 1 title
To set your featured posts, please go to your theme options page in wp-admin. You can also disable featured posts slideshow if you don't wish to display them.
This is featured post 2 title
To set your featured posts, please go to your theme options page in wp-admin. You can also disable featured posts slideshow if you don't wish to display them.
This is featured post 3 title
To set your featured posts, please go to your theme options page in wp-admin. You can also disable featured posts slideshow if you don't wish to display them.
Injen CAI(vsv mounting & vac lines) tips
TWM shifter install
Let’s get to the point. Everything is good until you get to step 7. The connectors to the shift cables on the 02/03′ are different and require manhandling to a degree….but Beware if you break the housing plastic or springs you are in for added work.
This photo is in relation to step 5
As you can [...]
Install TRD CAI
The TRD CAI may look complicated if you read the instruction. Once you see someone install it, it’s easier than you think. It takes about 40 minutes to one hour to install.
Here’s a picture of the airbox assembly.
VSV 1 and 2. The blue one is VSV 1 and the other one is VSV 2
1) Disconnect [...]
Toyota engine code explained
According to below here’s what 1ZZ-FE means
1 – First generation
Z – Engine series code name
Z – Previously used, and rebranded engine model (from where?)
F – Narrow valve angle, economy oriented engine (as oppose to G for wide valve, performance oriented engine)
E – Electronic fuel injection
2zz-ge
2nd generation, Z engine, rebranded, wide valve angle, high performance, electronic [...]
RSS Feed
Twitter